Step 7: Continue to rotate and slide the tube nut up to the flare. Step 6: Using a soft faced brass hammer drive the tool into the tubing. Step 5: Insert the tapered end of the tool into the tubing. Double Flare Instructions: The flaring tools provided in this set are designed to double flare thin wall steel, aluminum and. Step 4: Use a potable grease to grease the shank and shoulder of the tool. Step 3: Place the flared nut onto the tubing. Step 2: Use a deburring tool to debur the inside of the copper tube. Step 1: Cut the copper tubing to the size needed with a pipe cutter Made for 45 double flaring 3/16-inch steel, nickel, or copper tubing. It should also be used on connections that vibrate like a dryer or an RV, never use a water compression fitting in place of a flared fitting as this can lead to a fire or even an explosion due to leaked gas. A brake line flaring tool is the best way to maintain leak-free brake lines. 84 Sold by ARES TOOL and ships from Amazon Fulfillment. A flared fitting must always be used on a natural gas line or other hazardous/flammable gasses. This item: ARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper, Aluminum, Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case 36.84 36. Deburring the copper is much more critical for flaring than for swaging. A high-quality inner/outer reaming tool is best for making flares. Use a good deburring/reaming tool before swaging the copper. Milwaukee Close Quarters Tubing Cutter Set (3 -Piece) Model 48-22-4263 (304) 52 97. Flaring is when you are spreading the end of a copper tube approx 45 degrees into a funnel shape that will match the flare fitting you are attaching the copper tubing to. Go slowly to reduce the lip on the inside of the pipe. Milwaukee M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit with M12 FUEL Combo Kit and Copper Tubing Cutter. In order to flare copper tubing, it will require a flaring tool.

Copper tubing flare tool